熱等靜壓脫脂燒結爐

Hot isostatic pressure skimming sintering furnace

熱等靜壓脫脂燒結爐的應用簡介/Application

硬質合金等靜壓燒結技術，也稱之為低壓燒結或過壓燒結，這種工藝方法是將脫蠟、預燒、真空燒結、熱等靜壓制幾個工藝合為一道工藝在一個設備內完成的新方法。粉末冶金燒結爐主要用于不銹鋼、銅鎢合金、高比重合金、鉬合金、鈦合金和硬質合金等制品的脫脂和燒結。

Brief introduction: cemented carbide isostatic pressing sintering technology, also known as low pressure sintering or overpressure sintering, this process is a new process of dewaxing, pre-firing, vacuum sintering, hot and other static pressing in one equipment. Powder metallurgy sintering furnace is mainly used for skimming and sintering of stainless steel, copper-tungsten alloy, high specific gravity alloy, Mo alloy, titanium alloy and cemented carbide.

熱等靜壓脫脂燒結爐的產品特點/characteristic

1.爐門：自動鎖圈鎖緊

Furnace door: automatic locking ring locking

2. 爐殼：全碳鋼/內層不銹鋼

Furnace shell: all carbon steel / inner stainless steel

3.爐膽：全硬質復合氈

Furnace tank: fully rigid composite felt

4.加熱器材質：等靜壓石墨/模壓三高石墨

Heater material: isostatic graphite / molded three-high graphite

5.馬弗材質：等靜壓石墨

Maver material: isostatic pressed graphite

熱等靜壓脫脂燒結爐的產品規格/product specifications

注：特殊規格要求可根據客戶要求定制

Note: Special specification requirements can be customized according to customer requirements

以上參數可根據工藝要求調整，不作為驗收依據，具體以技術方案和協議為準

The above parameters can be adjusted according to the process requirements, not as a basis for acceptance, the specific technical plan and agreement shall prevail

熱等靜壓脫脂燒結爐的配置選擇/Configure select